Table of Contents
Advertisement
FUNCTIONAL DESCRIPTION
Switch
action
CAUTION:
Before plugging in the tool, always check to see that the switch trigger actuates properly
and returns to the "OFF" position when released.
This tool has a reversing switch to change
the direction of rotation. Move the revers-
ing switch lever to the A side for clockwise
rotation or the
B
side for counterclockwise
rotation.
To start the tool, simply pull the trigger.
Tool speed is increased by increasing pres-
sure on the trigger. Release the trigger to
stop. For continuous operation, pull the
trigger and then push in the lock button.
To stop the tool from the locked position,
pull the trigger fully, then release it.
Reversing switch lever
7 1
Switch trigger
NOTE:
Even with the switch on and motor running, the bit will not rotate until you fit the point of
the bit in the screw head and apply forward pressure to engage the clutch.
5
Advertisement
Table of Contents
