Sony DVP-NS300 Service Manual page 11

QQ
3 7 63 1515 0
A
If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. Yo u will
enjoy standard quality images.
Yellow (Video)
White (L)
Red (R)
Use the red and white plugs to connect to the audio input jacks (page 19).
B
If you are connecting to an S VIDEO input jack
Connect the S VIDEO cord (not supplied). Yo u will enjoy high quality images.
C
If you are connecting to a monitor, projector, or AV amplifier (receiver) having
component video input jacks (Y, P , P
B
Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord
(not supplied) or three video cords (not supplied) of the same kind and length. Yo u will enjoy
accurate color reproduction and high quality images.
Note
Do not connect your player to a VCR. Yo u may not receive a clear image on the TV screen if you pass the player
signals via the VCR.
CD/DVD player
TE
L 13942296513
18
Connecting to your TV
A
This connection will use your TV speakers for sound.
xRecommended surround sound effects for this connection
•TVS DYNAMIC (page 43)
•TVS WIDE (page 43)
CD/DVD player
DIGITAL OUT LINE OUT S VIDEO COMPONENT
OUT VIDEO OUT
Y
PCM/DTS/
DOLBY DIGITAL R-AUDIO 1-L VIDEO 1
P
B
COAXIAL OPTICAL
P
R
R-AUDIO 2-L VIDEO 2
A
LINE OUT
(yellow)
(white)
R-AUDIO 1-L VIDEO 1
(red)
R-AUDIO 2-L VIDEO 2
l : Signal flow
The yellow plug is used for video signals (page 17).
www
.
20
http://www.xiaoyu163.com
Ye llow (Video)
White (L)
Red (R)
)
R
VCR
TV
Connect directly
(yellow)
TV
(white)
(red)
Audio/video cord
(supplied)
to audio input
x ao
y
i
http://www.xiaoyu163.com
8
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select a connection
Select one of the following connections,
Connection Components to be connected
• TV (stereo)
(page 20)
A
• Stereo amplifier (receiver)
(page 21)
B
(having L and R audio input jacks only, or having a digital input jack)
• 2 speakers
(front L and R)
• MD deck/DAT deck
(page 21)
B
• AV amplifier (receiver) with a Dolby
(page 22)
C
(having L and R audio input jacks only, or having a digital input jack)
• 3 speakers
(front L and R, and rear (monaural))
• 6 speakers
(front L and R, center, rear L and R, and subwoofer)
• AV amplifier (receiver) having a Dolby Digital or DTS
(page 23)
D
input jack
• 6 speakers
(front L and R, rear L and R, center, and subwoofe r)
* Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
** "DTS" is a registered trademark of Digital Theater Systems, Inc.
Q Q
3 6 7 1 3
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
amplifier (receiver) has a digital input jack, use
deck, use . In this case, you can also connect the player directly to the MD deck or DAT
B-2
deck without using your stereo amplifier (receiver).
xRecommended surround sound effects for the
•TVS STANDARD (page 43)
z
In connection B-1 , you can use the supplied audio/video cord instead of using a separate audio cord.
z
To realize better surround sound effects, make sure that your listening position is in between your speakers.
Note
If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the
CD/DVD player
DIGITAL OUT LINE OUT S VIDEO COMPONENT
VIDEO OUT
OUT
PCM/DTS/
DOLBY DIGITAL R-AUDIO 1-L VIDEO 1
COAXIAL OPTICAL
R-AUDIO 2-L VIDEO 2
B-2
DIGITAL OUT
Coaxial digital
cord (not supplied)
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital input
u163
[Speakers]
Stereo amplifier (receiver)
Front
(L)
.
Front
(R)
l: Signal flow
1-4
2 9 9 4 2 8
through .
A D
*
Surround (Pro Logic) decoder
**
decoder and a digital
1 5 0 5 8 2 9 9 4
continued
. If the
B-1
. When connecting to an MD deck or a DAT
B-2
connection only
B-1
B-2
Y
P B
P
R
B-1
Stereo audio cord
LINE OUT
(not supplied)
(white)
R-AUDIO 1-L VIDEO 1
(red)
or or
R-AUDIO 2-L VIDEO 2
(white) (red)
m
to audio input
co
MD deck/DAT deck
continued
9 9
2 8 9 9
19
connection.
21