Table of Contents
Advertisement
Item
Various Function
Setting Options (underline indicates factory default)
Displays the function list to execute functions.
Monochrome (On, Off), Blue Only (On, Off), Red Off (On, Off), Green Off (On, Off),
Blue Off (On, Off), H Delay (On, Off), V Delay (On, Off), Banner (On, Off)*
Function Guide (On, Off)*
OSD Size (Large, Small)*
1
*
Banner
When "Banner" is set to "Off", the banner is displayed only when you press the SET button while
OSD menu is closed.
2
*
Function Guide
On: You can display the list of functions assigned to an F button on the video display by pressing
the SET button while OSD menu is closed.
Off: Function guide is not displayed.
3
*
OSD Position
Mode 1 (4096x2560): OSD is displayed in a 4096x2560 area.
Mode 2 (3840x2160): OSD is displayed in a 3840x2160 area.
4
*
OSD Size: The size of the OSD menu can be selected from "Large" and "Small".
5
*
Black Level Control: Adjust the black level of dark portions of the image when "Backlight
Control" is set to "Local Dimming".
Note
• "H Delay" and "V Delay" can be used only for SDI signals. Setting is enabled only when
"Peaking 1" or "Peaking 2" is selected and "False Color" is "Off".
• When "H Delay" is "ON", the image display position can be adjusted using the display
controller's for video in 1280x720 / 24.00P, 25.00P, 30.00P format. Adjust with the menu
screen closed.
• When checking the blanking area using "H Delay"/"V Delay", an audio signal check can be
performed, however some data is not displayed.
2
, OSD Position (Mode 1 (4096x2560), Mode 2 (3840x2160))*
4
, Black Level Control (On, Off)*
1
,
5
, Backlight Scan (High, Low, Off)
OSD Menu
3
,
63
Advertisement
Table of Contents
