In Case Of Difficulty - Honeywell PRO TH3210D Manual

Installation Guide
Ill you have difficult}, with your thermostat, please try the suggestions below. Most
problems can be corrected quickly and easily.
Display is blank
Temperature
se_ings do not
change
• Check circuit breaker and reset if necessary.
Make sure heating & cooling power switches are on.
o Make sure equipment door is securely closed.
• If battery powered, make sure fresh AA alkaline batteries are installed.
Make sure heating and cooling temperatures are set to acceptable ranges:
• Heat: 40 ° to 90°F (4.5 ° to 32°C).
o Cool: 50 ° to 99°F (10 ° to 37°C).
Heating system o
does not respond
("Heat On"
appears on o
Stiffen)
Cooling system
does net respond
("Cool On"
appears on
Stiffen)
_'CooJ Orl" or
"Heat On"
is flashing
o
®
®
o
Check for 24 Vac at the equipment on the secondary side of the trans-
former between power and common. If voltage is not present, check the
heating equipment to find the cause of the problem.
Check for 24 Vac between the heat terminal (Y) and the transformer
common. If 24 Vac is present, the thermostat is functional. Check the
heating equipment to find the cause of the problem.
Check for loose or broken wires between the thermostat and the heating
equipment.
Check for 24 Vac at the equipment on the secondary side of the trans-
former between power and common. If voltage is not present, check the
cooling equipment to find the cause of the problem
Check for 24 Vac between the cooling terminal (Y) and the transformer
common. If 24 Vac is present, the thermostat is functional. Check the
cooling system to find the cause of the problem.
Check for loose or broken wires between the thermostat and the cooling
equipment.
Compressor protection timeout is engaged. Wait 5 minutes for the
system to restart safely, without damage to the compressor.
"Heat On" is o Set the System switch to Heat, and set the temperature level above the
not displayed current room temperature.
"Ceel On" is o Set the System switch to Cool, and set the temperature level below the
net displayed current room temperature.
10