Honeywell HRG series Getting Started Manual page 16

16 | HRG Performance Series DVR Getting Started Guide
Configuring PTZ Settings
1.
2.
3.
4.
Controlling PTZ Cameras with the PTZ Control Panel
The PTZ control panel in the live view window provides a series of PTZ control buttons, as shown
in the following figure:
Control
Call Preset
Call Patrol
Call Pattern
Preset Settings
Patrol Settings
Pattern Settings
PTZ Menu
PTZ Settings
www.honeywellvideo.com
 
Click Menu Settings
Select, next to the Camera label, the channel where the PTZ camera is installed.
Configure the settings for baud rate, date bit, stop bit, parity, flow control, PTZ protocol
and address.
Click OK to save the changes and exit the PTZ Settings window.
Action
Call a PTZ preset.
Call a PTZ patrol.
Call a PTZ pattern.
Enter the PTZ preset configuration menu.
Enter the PTZ patrol configuration menu.
Enter the PTZ pattern configuration menu.
Enter the PTZ menu.
Enter the PTZ Settings menu.
PTZ to enter the PTZ Settings menu.