Table of Contents
Advertisement
•
To change the login timeout, enter a new value in minutes. This determines how long the
router keeps the Internet connection active after there is no Internet activity from the LAN.
Entering a timeout value of zero means never log out.
Note: You no longer need to run the ISP's login program on your PC in order to access the
Internet. When you start an Internet application, your router will automatically log you in.
•
If you know that your ISP does not automatically transmit DNS addresses to the router during
login, select "Use these DNS servers" and enter the IP address of your ISP's Primary DNS
Server. If a Secondary DNS Server address is available, enter it also.
Note: If you enter DNS addresses, restart your computers so that these settings take effect.
•
Click Apply to save your settings.
•
Click Test to verify that your Internet connection works. If the NETGEAR website does not
appear within one minute, refer to
Telstra Bigpond Cable Smart Wizard-Detected Option
If the Setup Wizard discovers Telstra Bigpond Cable is your ISP, you will see this menu:
Figure 2-8: Setup
Smart
•
Enter your Login, Password and Authentication Server. These fields are case sensitive.
Connecting the Router to the Internet
Reference Manual for the 54 Mbps Wireless Router WGR614 v4
Chapter 7,
Wizard menu for Telstra Bigpond Cable accounts
December 2003
"Troubleshooting."
2-9
Advertisement
Table of Contents
Troubleshooting
