Push Button Configuration
The Wireless-G Router Model WGR614v8 supports using the software button WPS method.
Using the Software Button in the Add WPS Client Screen
1. Log in to the router as described in
2. Select Add WPS Client in the main menu, and click Next.
3. Select the Push Button setup method.
Figure 2-6
4. Click the
button in the Add WPS Client screen. The following screen displays:
Figure 2-7
The green
button light on the Wireless-G Router begins to blink in a regular pattern.
While the button light is blinking, you have 2 minutes to enable WPS on the device you are
trying to connect to the router.
5. In the wireless client, follow its specific networking instructions to enable WPS, to allow it to
connect to the router.
Safeguarding Your Network
54 Mbps Wireless Router WGR614v8 User Manual
"Logging In to Your Wireless Router" on page
v1.1, May 2008
1-2.
2-13