Changing Wireless Security Settings; Viewing Basic Wireless Settings - NETGEAR WGR614 v8 User Manual

54 Mbps Wireless Router WGR614v8 User Manual
– Passphrase. ______________________________ These characters are case-sensitive.
Enter a word or group of printable characters. When you use WPA-PSK, the other devices
in the network will not connect unless they are also set to WPA-PSK and are configured
with the correct passphrase. Similarly, when you use WPA2-PSK, the other devices in the
network will not connect unless they are also set to WPA2-PSK and are configured with
the correct passphrase.
Use the procedures described in the following sections to specify the Wireless-G Router. Store this
information in a safe place.

Changing Wireless Security Settings

This section describes the wireless settings that you can view and configure in the Wireless
Settings screen, which you access under Setup in the main menu.

Viewing Basic Wireless Settings

To specify the wireless security settings of your router:
1. Log in to the router as described in
2. Select Wireless Settings under Setup in the main menu.
Figure 2-2
The available settings in this screen are:
2-6
"Logging In to Your Wireless Router" on page 1-2.
v1.1, May 2008
Safeguarding Your Network