NETGEAR WGR614 Reference Manual page 44

Reference Manual for Cable/DSL Wireless Router WGR614
From the Wireless Settings menu, click the Setup Access List button to display the Wireless
3.
Access menu shown below.
Figure 3-5: Wireless Card Access List Setup
Click Add to add a wireless device to the wireless access control list. The Available Wireless
4.
Cards list displays.
Click the Turn Access Control On check box.
5.
Then, either select from the list of available wireless cards the WGR614 has found in your
6.
area, or enter the MAC address and device name for a device you plan to use. You can usually
find the MAC address printed on the wireless adapter.
Note: You can copy and paste the MAC addresses from the firewall's Attached Devices menu
into the MAC Address box of this menu. To do this, configure each wireless PC to obtain a
wireless link to the firewall. The PC should then appear in the Attached Devices menu.
3-10 Wireless Configuration