Connecting The Wgr614; Connecting The Router - NETGEAR WGR614 Reference Manual

Reference Manual for Cable/DSL Wireless Router WGR614

Connecting the WGR614

This section provides instructions for connecting the WGR614 router. Also, the Model WGR614
Resource CD included with your router contains an animated Installation Assistant to help you
through this procedure.

Connecting the Router

There are three steps to connecting your router:
Connect the router to your network
1.
Log in to the router
2.
Connect to the Internet
3.
Follow the steps below to connect your router to your network. You can also refer to the GearBox
CD for Cable/DSL Wireless Router WGR614 included with your router which contains an
animated Installation Assistant to help you through this procedure.
1. Connect the router to your network.
Turn off your computer and Cable or DSL Modem.
a.
Disconnect the Ethernet cable (A) from your computer which connects to your cable or
b.
DSL modem.
A
Figure 2-1: Disconnect the cable or DSL Modem
Connect the Ethernet cable from your cable or DSL modem to the Internet port (A) on the
c.
WGR614.
2-4
Cable or DSL modem
Connecting the Router to the Internet