The Front Panel; The Rear Panel - NETGEAR WGM124 Setup Manual

NETGEAR Wireless Router Setup Manual

The Front Panel

The front panel of the wireless router includes various status lights.
You can use the status lights to verify connections.
Table 2-1. Status Light Descriptions
Label Activity
Power On Green Solid
Amber Blink
Off
WLAN On
Link/ACT On
Blink
LAN Green
Amber

The Rear Panel

The rear panel of the WGM124 router contains the items listed below.
• AC power adapter outlet
• Four LAN ports
• Internet (WAN) Ethernet port for connecting the router to a cable or DSL modem
• Factory default reset push button for
• One red status LED, which blinks when the default reset button is pushed.
• Three wireless antennae
2-2
Description
Power is supplied to the router.
Power is supplied to the router and it is performing its diagnostic test.
Power is not supplied to the router.
The WLAN wireless interface is enabled.
The router has detected a link with an attached device.
Data is being transmitted or received by the router.
The LAN port has detected a 100 Mbps link with an attached device.
The LAN port has detected a 100 Mbps link with an attached device.
Restoring the Default Configuration and Password
Getting to Know Your NETGEAR Wireless Router
December 2004