Testing Your Internet Connection; Manually Configuring Your Internet Connection - NETGEAR DG834GT Reference Manual

Reference Manual for the Model DG834GT 108 Mbps Super Wireless ADSL Router
Click Apply to save the settings.
5.
Click the Test button to test your Internet connection. If the NETGEAR Web site does not
6.
appear within one minute, refer to

Testing Your Internet Connection

After completing the Internet connection configuration, your can test your Internet connection.
Log in to the router, then, from the Basic Settings link in the Setup menu, click the Test button. If
the NETGEAR Web site does not appear within one minute, refer to
"Troubleshooting".
Your router is now configured to provide Internet access for your network. Your router
automatically connects to the Internet when one of your computers requires access. It is not
necessary to run a dialer or login application such as Dial-Up Networking or Enternet to connect,
log in, or disconnect. These functions are performed by the router as needed.
To access the Internet from any computer connected to your router, launch a browser such as
Microsoft Internet Explorer or Netscape Navigator. You should see the router's Internet LED
blink, indicating communication to the ISP. The browser should begin to display a Web page.
The following chapters describe how to configure the Advanced features of your router, and how
to troubleshoot problems that may occur.

Manually Configuring Your Internet Connection

You can manually configure your router using the menu below, or you can allow the Setup Wizard
to determine your configuration as described in the previous section.
Connecting the Router to the Internet
Chapter 8, "Troubleshooting".
August 2004
Chapter 8,
3-15