Wizard-Detected Pppoe Login Account Setup - NETGEAR DG834GT Reference Manual

108 mbps super wireless adsl router
Hide thumbs Also See for DG834GT:
Table of Contents

Advertisement

Reference Manual for the Model DG834GT 108 Mbps Super Wireless ADSL Router
Note: If instead of the Setup Wizard menu, the main menu of the router's Configuration
Manager as shown in
bring up this menu.
You must select a country and language. Language choices are English, French, German, and
2.
Italian. After you change the language, the remaining setup screens change to the language of
your choice.
Select Yes to allow the router to automatically determine your connection.
3.
Click Next.
4.
The Setup Wizard will now check for the following connection types:
Dynamic IP assignment
A login protocol such as PPPoE or PPPoA
Classical IP over ATM (RFC1577)
Fixed IP address assignment
Next, the Setup Wizard will report which connection type it has discovered, and then display
the appropriate configuration page. If the Setup Wizard finds no connection, you will be
prompted to check the physical connection between your router and the ADSL line. When the
connection is properly made, the router's Internet LED should be on.
The ADSL settings for the multiplexing method and VPI/VCI will update with the preset
5.
defaults. The multiplexing method preset default settings will usually work. Only change the
multiplexing method if you are sure your ISP requires Virtual Path Identifier (VPI) or Virtual
Channel Identifier (VCI) settings that are different from the default values.
Incorrect VPI or VCI settings will prevent you from connecting to the Internet. To change
these settings, click the ADSL Settings link on the main menu. See
3-20
for more details.
The procedures for filling in the configuration page for each type of connection follow below.

Wizard-Detected PPPoE Login Account Setup

If the Setup Wizard determines that your Internet service account uses a login protocol such as
PPP over Ethernet (PPPoE), you will be directed to the PPPoE page shown in
Connecting the Router to the Internet
Figure 3-15
appears, click the Setup Wizard link in the upper left to
August 2004
"ADSL Settings" on page
Figure
3-10:
3-11

Advertisement

Table of Contents
loading

Table of Contents