Page 1
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem NETGEAR, Inc. A Bay Networks Company 4401 Great America Parkway Santa Clara, CA 95054 USA Phone 888-NETGEAR M1-XM128U-0 February 1998...
Page 2
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.
Figure 2-1. Front panel of the Model XM128U modem (with S/T interface) ...2-1 Figure 2-2. Rear panel of the Model XM128U modem ...2-3 Figure 3-1. Model XM128U modem connections ...3-2 Figure 3-2. New Hardware Found screen ...3-4 Figure 3-3. Install From Disk screen ...3-5 Figure 3-4.
The Model XM128U modem sets a new price and performance standard for rapidly growing Internet and telecommuting applications. The NETGEAR Model XM128U modem provides connection for one or more PCs to the Internet or to the office over ISDN (Integrated Services Digital Network) lines. The modem operates at a...
Initial Caps Menu titles and window and button names. Related Publication For more information about the Model XM128U modem, refer to the Reference Guide for the Model XM128 ISDN Digital Modem (Bay Networks part number M-XM128NA-1 or a later version).
Integrated Services Digital Network (ISDN) lines to the Internet or to branch offices. The Model XM128U modem also allows a user to connect to the analog world through an analog modem, a fax machine, or a telephone.
Page 12
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem The Model XM128U modem has the following speed and compatibility features: • Plug-and-Play support for a Windows • Full compatibility with both ISDN and remote public-switched telephone network (PSTN) by way of ISDN •...
Digital Modem. Use the key at the bottom of each illustration to identify the panel components. Front Panel For easier management and control of the Model XM128U modem, familiarize yourself with the components on the front panel, as illustrated in...
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem LEDs LEDs on the front panel of the Model XM128U modem allow you to monitor and diagnose the device. Table 2-1 describes each LED. Table 2-1. LED descriptions Label...
POWER This receptacle is for the power adapter. RS-232 This RS-232 COM port is for connecting the Model XM128U modem to the serial port of a computer or data terminal. ISDN This port is for connecting the Model XM128U modem to the ISDN line.
This chapter provides information about installing and using the Model XM128U ISDN Digital Modem. Package Contents Your package should contain the following items: • Model XM128U ISDN Digital Modem • Power adapter • RJ-45 ISDN telephone cable • Shielded RS-232 25-pin straight cable •...
Installing the Modem Before connecting any of the devices to your modem, make sure the power is turned off on your computer and your Model XM128U modem. Then connect the ISDN line to your modem. Refer to Figure 3-1 and then to the steps following the illustration for detailed instructions for making those connections.
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem Connect the other end (female end) of the 25-pin straight cable to the serial (COM) port on your computer. Note: If your computer has a 9-pin serial connector, use a 25-pin to 9-pin converter (25-pin male to 9-pin female).
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem Installing the Windows 95 Driver The Model XM128U modem is Plug-and-Play compatible with Windows 95. If you are running Windows 95 or Windows NT, refer to this section to install the Windows 95 driver. If you are running Windows 3.X, refer to Chapter 4, “Configuration,”...
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem Click on OK. The Install From Disk screen opens, as illustrated in Figure 3-3. Install From Disk screen Insert the NETGEAR XM128 Driver Disk in the floppy drive. As instructed on the Install From Disk screen, type A:\ to find the driver disk.
Dial-Up Networking. Installing and Launching FirstGear If you are not setting up your Model XM128U modem with a computer running Windows 95, you must have a terminal program that allows you to send and receive AT commands and responses from the modem.
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem To install the FirstGear software: Insert your NETGEAR FirstGear disk into Drive A on your computer. Select Run... from the Start menu of Windows 95. Type A:\Setup.exe and press [Enter].
North America. In order to simplify the installation process, your NETGEAR Model XM128U ISDN Digital Modem comes with an Installation Wizard. By simply entering the assigned telephone number(s), you enable the Wizard to automatically determine the corresponding SPIDs and chosen switch type.
Wizard, you must perform the following steps: You must first have an active ISDN line (provided by your local telephone company). You must connect the Model XM128U modem to your PC and the ISDN line as described page 3-2 in “Installing the Modem.”...
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem To launch FirstGear from the NETGEAR program folder: Click on Next to continue, and the Telephone numbers assigned screen appears as shown Figure 3-8. Figure 3-8. Telephone numbers assigned screen Refer to the information supplied by your local telephone company.
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem Click on Next. Based on the selection on the previous screen, you will be able to enter either one or two telephone numbers. Enter each telephone number, including the area code, in the Telephone number entry screen illustrated in Figure 3-9.
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem After you enter the telephone number(s), click on Next to continue. At this point, the FirstGear Wizard will automatically detect the Service Profile IDs (SPIDs) and the appropriate switch type. When the procedure is successful, the Wizard displays the final status screen shown in Figure 3-10.
Click on OK to continue. Based on these new values, the Wizard attempts a test call. If the call fails, you will be prompted once again to recheck the values. If the problem persists, contact NETGEAR customer support. Installation Figure...
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem About FirstGear FirstGear allows you to set the telephone numbers, run diagnostics, and enable/disable the Call Waiting feature. When you run FirstGear, it automatically displays the current setting of the Model XM128U modem.
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem Clicking on the buttons at the bottom of the screen will have the following results: • The OK button saves the current configuration and exits the program. • Cancel The Cancel button exits the program without saving the current configuration.
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem The Configuration menu selections have the following results: • Retrieve Selecting Retrieve allows you to review the current setting of the Model XM128U modem. • Save Selecting Save allows you to update the modem with the new settings.
Tools menu screen By selecting the AT Commands menu bar, you can enter AT commands directly to set some of the advanced features of the Model XM128U modem (refer to the Reference Guide for the Model XM128 ISDN Digital Modem).
You must install Windows 95 and Dial-Up Networking before proceeding with this section. Configuring Dial-Up Networking for One B Channel To configure your Model XM128U modem with Dial-Up Networking for one B channel: Double-click on the My Computer icon. Double-click on the Dial-Up Networking folder.
For example, you may want to use the Netgear XM128, Internet PPP 64K driver for your 64K connection to your remote LAN while you are telecommuting. On the other hand, you can set up a second dial-up connection with the Netgear XM128, Internet PPP 128K driver for your 128K Internet connection through your local ISP.
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem Click on Next. The second Make New Connection screen opens, as illustrated in Figure 3-18. Make New Connection screen for entering ISP information Type the phone number of the Internet service provider (ISP) or host you will be calling.
The My Connection screen, as illustrated in Figure 3-19. My Connection screen Make sure that your Model XM128U modem appears in the Connect using box. If you have settings given to you by your ISP, follow those guidelines and go to step 20 on page 3-23.
Page 38
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem Click on the Server Types tab. The Server Types tab opens, as illustrated in If you are using PPP, use the default settings shown in If you are connecting to a LAN, select Log on to network.
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem Click on TCP/IP Settings. The TCP/IP Settings screen, as illustrated in Figure 3-21. TCP/IP Settings screen Click on the Specify name server addresses radio button. Enter your primary and secondary Domain Name Server (DNS) numbers.
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem Configuring Dial-Up Networking for Two B Channels To configure your Model XM128U modem for use with two B channels using Multilink PPP: Double-click on the My Computer icon. Double-click on the Dial-Up Networking folder.
Page 41
bulletin board service ii Configuration menu screen 3-14 conventions vii customer support ii features 1-1 FirstGear software, installing 3-6 front panel 2-1 Help menu screen 3-18 Install From Disk screen 3-4 installation 3-2 Introduction screen 3-9 ISDN port 2-3 ISDN Settings menu tab screen 3-13 Launch screen 3-8 LED descriptions 2-2 Index...
Page 42
screens Configuration menu 3-14 Finish Installation Wizard 3-12 Help Menu 3-18 Install From Disk 3-4 Introduction 3-9 ISDN menu tab 3-16 ISDN Settings menu tab 3-13 ISDN Settings menu tab screen 3-16 Launch 3-8 Make New Connection 3-19 My Connection 3-21 New Hardware Found 3-4 Retrieve menu tab 3-15 Select Device 3-5...