Table of Contents
Advertisement
Reference Manual for the ProSafe Network Management System NMS100
Custom Menus
The Manage menus are actually built-in custom menus from an external configuration file. You
can also add custom menus to display particular tables. For example, if you have only a few device
types in your network you probably should add custom menus to display the vendor specific tables
for those devices. You can then display MIB information using the right-click menus instead of
searching for MIB tables in the MIB Selection Tree. For more information about custom menus,
select the Menu tab of the Selection Tool and press the F1 key.
Table Display Elements
The following figure shows a sample table display and describes the function of table controls.
Figure 3-3: Table display and table controls
•
To start a graph display, first select one or more cells (rows, columns, or individual cells), then
use the Show Graph button.
•
To change a table cell and do a Set Operation to the device, first locate settable cells (those
displayed in blue). Double-click the cell to move into Edit Mode. Enter the new value directly
into the cell (or select from the pull-down if it is displayed). Then click the Check Edit Control
button. To cancel a Set operation in progress, click the Cross Edit Control button.
3-12
Edit
Controls
Pause
Polling
September 2004 202-10058-01
Save
Edit
to File
Show
Entry
Graph
Switch
Axis
Short
Names
Data and Statistics
Poll
Interval
Advertisement
Table of Contents
