Setting Up A Ma101 In Ad-Hoc Mode - NETGEAR MA101 MA101 MA101 Reference Manual

Setting Up a MA101 in Ad-Hoc Mode

Set up the MA101 USB Adapter for your computer.
Follow the instructions above for setting up the MA101 with the version
of the Windows operating system you are using.
Configure your wireless
adapters.
Double click on the System
a.
Tray icon to run the wireless
LAN configuration utility to
make whatever configuration
changes may be needed.
Set the MA101 as follows:
b.
• SSID: Wireless
• Mode (Infrastructure or
Ad-Hoc): Ad-Hoc
• WEP encryption: assure
that both computers are
configured with the same
WEP parameters, if
enabled.
24
MA101 Configuration Utility
Note: To connect computer- to-computer
(Ad-Hoc) but both computer-to-
computer and access point
(infrastructure) networks are within
range of your computer, then select
Computer-to-computer (Ad-Hoc)
networks only.