Recording - D-Link DCS-6815 User Manual

Hide thumbs Also See for DCS-6815:

Table of Contents

Section 3 - Configuration

This page allows you to adjust FTP server settings and event triggers.

Enable:

Tick this checkbox to enable recording.

Record to FTP

Server:

The camera can record video directly to an FTP server.

FTP Server:

This is the address of the SMTP server. You may enter an IP

address or a DNS address.

FTP Port:

This is the port that the FTP server operates on. The default

FTP port is 21.

This is the username that will access the FTP server.

This is the password associated with the FTP username.

Verify Password:

Type the FTP password a second time for verification.

Filename Prefix:

This is the prefix that will be appended to the beginning of the

file before the date.

Save Path:

This is the folder on the FTP server to which the recording

will be saved.

Trigger By:

You may choose to trigger recording by motion detection or

digital output.

Pre-record Time:

This is the amount of time that will be recorded prior to the

event.

Post-record Time:

This is the amount of time that will be recorded after the

event.

D-Link DCS-6815 User Manual

Recording

Table of Contents