Cisco 7200 VXR router User Manual page 14

Physical Description
Table 1-1 Cisco 7200 VXR Physical Specifications (Continued)
Description
DC voltages supplied
and maximum,
steady-state current
ratings
DC-input cable
Airflow
Temperature
Humidity
Recommended minimum
software requirements
Compliance
Safety
EMI
1 Mbps = megabits per second.
2 Btu = British thermal units.
3 VAC = volts alternating current.
4 A = amperes.
5 Hz = hertz.
6 AWG = American Wire Gauge.
7 VDC = volts direct current.
8 cfm = cubic feet per minute.
Note
Cisco 7200 VXR routers, see the section "Site Requirement Guidelines" in the chapter
"Preparing for Installation."
1-4 Cisco 7200 VXR Installation and Configuration Guide
Specification
+5.2V @ 30A
+12.2V @ 9A
–12.0V @ 1.5A
+3.5V @ 13A
In accordance with local and national wiring regulations
8
~80 cfm
32 to 104 F (0 to 40 C) operating; –4 to 149 F (–20 to 65 C) nonoperating
10 to 90% noncondensing
Cisco IOS Release 12.0(2)XE2 or later releases of 12.0 XE
Cisco IOS Release 12.0(3)T or later releases of 12.0T
CE Marking
UL 1950, CSA 22.2 No. 950, EN60950, AUSTEL TS001,
AS/NZS 3260, IEC 950
FCC Class A (47 CFR, Part 15), ICES-003 Class A, EN55022 Class B, CISPR22 Class B,
AS/NZS 3590 Class B, and VCCI Class B
For a chassis footprint, additional dimensions, and clearance requirements for the