Cisco 7200 VXR router User Manual page 138

Configuring a Cisco 7200 VXR Router
Step 9
4-10 Cisco 7200 VXR Installation and Configuration Guide
The following sample display includes a continuous listing of all configuration
parameters selected in Step 3 through Step 8. Only IP, IPX, and AppleTalk are
the selected protocols for this example.
Configuring global parameters:
Enter host name [Router]: router
The enable secret is a one-way cryptographic secret used
instead of the enable password when it exists.
Enter enable secret: barney
The enable password is used when there is no enable secret
and when using older software and some boot images.
Enter enable password: betty
Enter virtual terminal password: fred
Configure SNMP Network Management? [yes]:
Community string [public]:
Configure Vines? [no]:
Configure LAT? [no]:
Configure AppleTalk? [no]: yes
Multizone networks? [no]: yes
Configure DECnet? [no]:
Configure IP? [yes]:
Configure IGRP routing? [yes]:
Your IGRP autonomous system number [1]: 15
Configure RIP routing? [no]:
Configure CLNS? [no]: n
Configure bridging? [no]:
Configure IPX? [no]: yes
Configure XNS? [no]:
Configure Apollo? [no]:
Save your settings to NVRAM. (See the "Saving the Running Configuration to
NVRAM" section on page 17.)