Initial Setup; Selecting The Dialling Mode; Setting The Lcd Contrast; Selecting The Ringing Volume - NEC AT-35 User Manual

Selecting the Dialling Mode

Set the dialling mode switch to either DP (Pulse) or MF (Tone) to select the
signalling type. The correct mode depends on the requirements of the
PBX to which the telephone is connected.

Setting the LCD Contrast

There are 5 display contrast settings.
1. Ensure the phone is idle.
2. Press VOLUME repeatedly to
set the desired LCD contrast.

Selecting the Ringing Volume

Select from three ringing volume levels using the Ringing Volume Switch,
L (low), M (mid), or H (high).

Selecting the Ringing Tone

There are 3 ringing tones to choose from – low, mid and high pitch.
1. Ensure the phone is idle.
2. Dial 1 .
3. Dial 1 (low), 2 (mid) or 3 (high). (Default setting is 1.)
4. Dial #.
The selected ringing tone will play for approximately 2 seconds.

Setting the Clock

This telephone is equipped with a 24 hour clock. The clock is shown on
the display while the phone is idle. To set the clock, follow the steps below.
1. Ensure the phone is idle.
2. Hold the SET TIME button for approx. 2 seconds until the year appears
flashing on the display.
3. Advance up or down to the correct year by pressing the
4. Press the SET TIME button to set the year and advance to the Month.
5. Repeat this process to set the Month, Date, Hour and Minute.

INITIAL SETUP

8
or keys.