What You Need To Do; How You Use The Frusdr Load Utility - NEC MH4500 User Manual

What You Need to Do

You can run the utility directly from the configuration software CD or from
diskettes you create from the CD.
If you choose to run the FRUSDR Load Utility from a diskette, you must copy
the utility from the CD and follow the instructions in the included
README.TXT file.
If your diskette drive is disabled or improperly configured, you must use BIOS
Setup to enable it. If necessary, you can disable the drive after you are done with
the FRUSDR utility.

How You Use the FRUSDR Load Utility

The utility
T
is compatible with ROM-DOS Ver. 6.22, MS-DOS Ver. 6.22, and later
versions
T
accepts CFG, SDR, and FRU load files (the executable file for the utility
is frusdr.exe)
T
requires the following supporting files
Command Line Format
The basic command line format is
frusdr [-?] [-h] [-d {dmi, fru, sdr}] [-cfg filename.cfg] [-fru filename.fru]
The commands and command descriptions are given in the following table.
Command
frusdr
-? or -h
-d {dmi, fru, sdr}
-cfg filename.cfg
-p
-v
one or more .FRU files describing the system's field replaceable
units
a .cfg file describing the system configuration
an .sdr file describing the sensors in the system
Command Line Format
Description
Utility name
Displays usage information
Displays requested area only
Uses custom .CFG file
Pause between blocks of data
Verbose, display any additional details
Emergency Management Port C-17