NEC 140He User Manual page 88

4-16
Option Parameter
Serial Port A Disabled
[Enabled]
Base I/O Address [3F8]
2F8
3E8
2E8
Interrupt IRQ 3
[IRQ 4]
Serial Port B Disabled
[Enabled]
Base I/O Address 3F8
[2F8]
3E8
2E8
Interrupt [IRQ 3]
IRQ 4
Parallel Port Disabled
[Enabled]
Mode Output Only
Bi-directional
EPP
[ECP]
Base I/O Address [378]
278
Interrupt IRQ 5
[IRQ 7]
DMA channel [DMA 1]
DMA 3
PS/2 Mouse Disabled
[Enabled]
USB Controller Disabled
[Enabled]
Legacy USB Disabled
Support
[Enabled]
Description
Specify whether serial port A is enabled or disabled.
Selects the base address and interrupt (IRQ) for serial
port A. These menus are displayed when the Serial
port A is enabled.
Specify whether serial port B is enabled or disabled.
Selects the base address and interrupt (IRQ) for serial
port B. These menus are displayed when the Serial
port B is enabled.
Specify whether the parallel port is enabled or
disabled.
Selects the parallel port operation mode, base
address, interrupt (IRQ), and DMA channel. These
menus are displayed when the Parallel Port is enabled.
Specify whether the mouse is enabled or disabled.
Specify whether the USB controller is enabled or
disabled.
Specify whether the USB keyboard is made available
in operating system which does not support USB
formally.
Your Setting
[ ]: Factory-set