Fitting/Removing The Bowl; Changing The Mixer Attachment; Product View - Buffalo GL190 Instruction Manual

Telephone Helpline: 0845 146 2887 (United Kingdom)
Remove the appliance from all packaging.

Fitting/Removing the Bowl

Turn Off the appliance.
1.
Open the safety guard by turning it to the left
2.
(GL190 & GL191) or lifting it above the mixer
(GJ461).
Lower the bowl with the bowl handle.
3.
Release the locking catches either side of the
4.
bowl.
Lift the bowl. The bowl is held in place by two pins
5.
securing the handles to the cradle and a hole at
the back of the appliance which houses the lug on
the bowl lip.
Reverse the procedure to fit the bowl.
6.
Note: Ensure the handle is fully pushed
back and the bowl is completely raised or
the mixer will not work.
Note: Regularly grease the bowl lift mechanism to ensure smooth operation .

Changing the Mixer Attachment

Turn Off the appliance.
1.
Open the safety guard by turning it to the left (GL190 & GL191) or lifting it above the mixer (GJ461).
2.
Lower the bowl with the bowl handle.
3.
Push the mixer attachment up and to the left to release it.
4.
Insert the desired attachment. Push up and to the right to lock it into place.
5.
Raise the bowl.
6.
BUFFALO recommend the following uses for each attachment:.
Spiral Dough hook
Securing pins
Heavy mixes
dough, pie pastry etc.
UK
Suitable Gears: 1
Slow
3