Monitor Data Usage - NETGEAR AirCard 785 Quick Start Manual

To connect with devices using WPS:
¾
Press the Power or Navigation button to
1.
awaken the LCD screen.
Press the Navigation button until WPS setup
2.
screen displays.
3. To activate WPS, press the Power button.
Within two minutes, press the WPS button on
4.
the device that you want to connect to your WiFi
network.
The hotspot and the wireless device
automatically communicate and establish a
connection.

Monitor Data Usage

You can monitor data usage using either the LCD
screen or the web page. Visit the hotspot web page to
configure your monthly data usage.
To view data usage on the LCD screen:
¾
Awaken the LCD screen by pressing either the
Power or the Navigation buttons.
To configure your monthly data usage:
¾
1. Launch an Internet browser from a computer or
wireless device that is connected to the network.
Enter http://netgear.aircard.
2.
12