USING ON-SCREEN MENU
To set up a keyword to enable the Security function without using a regis-
tered PC card
1. Use the SELECT
keyboard to enter a keyword.
NOTE: Please make a note of your keyword.
2. Use the SELECT
"Are you sure?" message will appear. Use the SELECT
press the ENTER button.
The Security function takes effect.
To register a PC card as a protect key
1. Insert a PC card into the PC card slot of the projector.
2. Use the SELECT
ENTER button. A check mark will be placed.
3. Use the SELECT
ton.
Data of the PC card will be read into the projector.
4. Use the SELECT
button.
Downloaded data will be registered and be displayed in the list window.
5. Use the SELECT
keyboard to enter a keyword.
NOTE: To use a PC card as a protect key, you must also set up a keyword. Please
make a note of your keyword.
This completes registration of your PC card.
To enable Security, use the SELECT
use the SELECT
enabled. An "Are you sure?" message will appear. Use the SELECT
button and press the ENTER button.
The Security function takes effect.
Menu Descriptions & Functions
button to select "OK", then the Security function will be enabled. An
button to select "OK" and "Security function will be
button to select "Keyword" and use the software
button to select "Enable" and use the SELECT
button to select "Use Protect key" and press the
button to select "Read" and press the ENTER but-
button to select "Register" and press the ENTER
button to select "Keyword" and use the software
E-115
button to select "Enable" and
button and