NEC SuperScript 1800 Instructions page 2

NEC
Use this instruction sheet for installing the optional NEC SuperScript 1800 500-sheet 2nd Cassette (Tray 3). The cassette can
hold 500 sheets of medium weight paper or 40 envelopes. Do not load transparencies or label sheets in the 500-sheet 2nd
Cassette. For a complete list of usable media sizes see Appendix B, in the SuperScript 1800 User's Guide .
Installing the 500-sheet 2nd Cassette
1. Turn off the printer.
2. Remove all cables (A) .
3. Make sure there is plenty of room around and
above the printer to work. Remove the 500-sheet
2nd Cassette from its packaging.
4. Put the 500-sheet 2nd Cassette unit next to the
printer.
5. Carefully place the printer on the 500-sheet 2nd
Cassette unit as shown (B) .
A
Loading Paper in the 500-sheet 2nd Cassette
1. Remove the tray from the 2nd Cassette unit (A) .
Take out the styrofoam packing.
2. Make sure the lever on the left-front side of the
cassette tray is positioned into the hole at the end of
the slot (B) .
3. Squeeze and adjust the Back Paper Guide to the
desired paper length (C) .
4. Make sure the Envelope Guide is adjusted to its back
position (D) .
A
D
S S 1800
UPER CRIPT
O 500-
PTIONAL SHEET
B
note:
The 500-sheet 2nd Cassette is
referred to as Tray 3 in the printer driver and
on the Operator Panel.
B
Envelope Guide
E
2 C — I
ND ASSETTE NSTRUCTIONS
6. Reconnect all cables.
7. Turn on the printer (C) .
8. Make sure READY appears on the Operator Panel display.
9. If you are using the Windows PostScript printer driver,
open the Properties window, view the Device Options
(Windows 95/98) or Device Settings (Windows NT 4.),
and make sure that the optional cassette (Tray 3) is
selected.
10. Confirm the installation by printing a printer
configuration page from the Operator Panel as described
in Chapter 5 of the SuperScript 1800 User's Guide .
5. Lift the tab on the top of Side Guide 1 and slide it to the
paper size indicated on the tray bottom (E) .
6. Place the paper into the tray print side down .
7. Move Side Guide 2 to fit lightly against the paper
stack (F) .
8. Reinsert the tray into the 500-sheet 2nd Cassette unit.
To load envelopes please see the User's Guide.
lever
C
C
F