Call Volume; Handover Tone - NEC IP3AT-8WV(AUSTRALIA) User Manual

• CALL VOLUME

Factory Default: Middle
You can adjust receiver volume.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select "5.Setting" and
then press the
- Press the key to select "1.User Setting"
and then press the
- Press the key to select "2.Talk" and
then press the
- Press the key to select "3.Call Volume"
and then press the
- Call Volume can be set in 3 levels (Small,
Middle and Large).
- Press the key to select an appropriate
volume and then press the "OK" soft key.
Call Volume
Large
OK
You can reach the Call Volume
TIP
menu by pressing the following
keys.
To go to the Call Volume menu:
key.
key.
key.
key.
Back

• HANDOVER TONE

Factory Default: Disable
Your phone can provide a warning tone when
handover takes place.
Handover
TIP
transferring a wireless phone user
from one Access Point to another.
- Press the
Your phone displays the main menu.
- Press the
then press the
- Press the
and then press the
- Press the
then press the
- Press the
Tone" and then press the
- Press the
"2.Enable" and then press the "OK" soft
key.
HandoverTone
1.Disable
2.Enable
You can reach the Handover Tone
TIP
menu by pressing the following
keys.
To go to the Handover Tone menu:
43
is the process
key while in Standby mode.
key to select "5.Setting" and
key.
key to select "1.User Setting"
key.
key to select "2.Talk" and
key.
key to select "4.Handover
key.
key to select "1.Disable" or
OK Back
of