Flexible Arm Installation - NEC MultiSync LCD1970GX LCD1970GX LCD1970GX User Manual

Flexible Arm Installation

This LCD monitor is designed for use with a flexible arm. To mount the monitor
to a flexible arm:
1. Follow the instructions on how Remove Monitor Stand for Mounting to
remove the stand.
2. Use the 4 screws that were removed from the stand to attach the arm to the
monitor (Figure F.1).
NOTE: The LCD monitor should only be used with an approved arm (e.g. GS mark). To
meet the safety requirements, the monitor must be mounted to an arm which
guaranties the necessary stability under consideration of the weight of the monitor.
Figure F.1
100mm
4 Screws (4M)
(Max Depth: 8.5mm)
15503781-LCD1970GX(A)-content
100mm
8
Page 8
Thickness of Bracket (Arm)
2.0~3.2mm
Weight of LCD assembly:
4.9kg MAX
12/24/2004, 5:37 PM Adobe PageMaker 6.5C/PPC