Orion OAP1506 User Manual page 6

2. Button of Auto function
Auto function button is on the remote controller. Press the button the
signs of AUTO and
and VOC , the unit will work automatically according to the density.
VOC
The sign of
detected by the odor sensor in three degrees separately with sign of
VOC
for low density,
VOC
indicates the density of dust detected by the dust sensor in three
degrees separately with the sign of
3. Button of time setting
Press the button of time setting, the signs of clock and
shown on the LED screen. Press button of "+" or "-" each time, the
time will increase from 30 minutes to 8 hours longest. The time set
will be submitted with a further press of the button of time setting.
The signs of clock and light in stability. Without the press of the time
setting button for confirmation the time set will be given up. To give up
the time set you may press the time setting button again.
4. Button of sleeping mode
Press the button of sleeping mode, the unit works in low speed with a
sign of sleeping on and sign of speed dim.
5.The buttons of Power ,Speed ,UV light and
control are all the same in function as those on the panel of the unit.
Power
Auto
Anion and
UV-light
AUTO
Speed
Operation
will light. Sensors will check the density of dust
for high.The sign of
for middle and
Transmitter
Children lock
Time
Time setting
Sleep
on LED indicates the density of VOC
VOC
Ionizer
Notice
1. Please take off the insolating plate
of the battery before usage of
remote control.
2. Please direct the remote control to
the receiver window on the unit.
3. Be sure to take the battery out of the
remote control if it is out of use for a
long time.
for middle and
on LED
for low density,
for high.
on the remote
will be
4