Configuring The User Option Menu - NEC 120 User Manual

Configuring the User Option Menu

REFERENCE
Table 2-5 User Option Menu Commands
Commands
Ring Type
Noise Mode
Current IP
address
Extension
Push to talk
NOTE
Mobile Handset 120 and Desktop Charger/Gang Charger User Guide - Revision 1
Table 2-5 describes commands located on the User Option Menu.
Table 2-4 describes available navigation tools.
Descriptions
Select Telephone Ring to set the standard
ring on the Wireless Telephone.
• Normal: the factory default ring.
• Vib/Norm ring: vibrates for five seconds
and then rings.
• Vibrate ring: vibrates for a non-audible
call alert.
Adjusts the Wireless Telephone to account
for background noise.
• Normal: for most office environments.
• High: for moderate background noise.
• Severe: for extremely noisy conditions.
In IP systems, the IP address of the
Wireless Telephone is displayed. This
number may not be edited.
Sets the extension number associated with
your Wireless Telephone. This number is
used to identify the Wireless Telephone and
is for display purposes only.
Channel selection 1-8: selects the channel
used for two-way radio transmission and
monitoring.
• Enable turns on PTT mode.
• Disable turns off PTT mode.
Additional options may be present. Contact your system administrator for
information.
MH120 Wireless Telephone
Actions
Press 0 to select desired ring type. The ring type
currently set displays with an asterisk.
Select an option that describes the noise in your
environment.
None.
Use keypad to enter extension number.
Enter number to select channel.
Select Enable or Disable.
2-11