How To Check The Hdd; Cleaning - Pioneer PRV-LX10 Service Manual

5

7.1.12 HOW TO CHECK THE HDD

• How to check the HDD that is mounted on the product is described below:
1 Select Function Menu, Setup, System, HDD Tools, then Check, and execute. "HDD File System Check" is executed, and
recoverable errors are corrected. The results can be checked on the monitor screen.
2 The HDD check can also be performed from the following menu displayed during OS installation:
(1) [UP] : Full Install (Delete all data)
(2) [DOWN] : Install (Keep user's data)
(3) [LEFT] : HDD File System Check
(4) [RIGHT] : HDD Test (Bad Block Check)
(5) [SCAN R] : Quit
Select (3) or (4), and execute. The result can be checked on the monitor screen.
For details on how to enter the menu, see "OS installation" in "7.1.14 How to Install the OS or Program."
Notes:
• An HDD Test (4 above) may take 10 hours or more, depending on the capacity of the HDD.
• If the menu does not appear in the process of the normal OS installation procedures, change the setting of BIOS "First Boot
Device" to CD-ROM then restart the unit from the OS installation disc.
• In the above case, after the HDD Check is finished, be sure to return the setting of BIOS "First Boot Device" to HDD.

7.1.13 CLEANING

Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools:
• Pickup
Position to be cleaned
Pickup lenses
• Fan
Position to be cleaned
Fans
5
6
Cleaning tools
Cleaning liquid : GEM1004
Cleaning paper : GED-008
Cleaning tools
Cleaning paper : GED-008
6
7
PRV-LX10
7
8
A
B
C
D
E
F
149
8