Cisco 2600 Series Operation Manual page 93

CE1/PRI Module LEDs
Figure 8-16 and Figure 8-17 show CE1/PRI module LEDs.
Figure 8-16
cE1
PRI
Figure 8-17
cE1
PRI
All network modules have an enable (EN) LED. This LED indicates that the module has
passed its self-tests and is available to the router.
All PRI modules display four additional LEDs for each port. These LEDs are described in
Table 8-4.
1-Port CE1/PRI Network Module LEDs
CTRLR 0
CE1/PRI LEDs
2-Port CE1/PRI Network Module LEDs
CE1/PRI LEDs
CTRLR 1
CTRLR 0
CE1/PRI LEDs
Connecting ISDN PRI Network Modules to a Network 8-13
CE1/PRI Module LEDs
EN
Enable LED
EN
Enable LED