Before You Start; Install The Battery; Charge The Battery - NETGEAR Mingle User Manual

BEFORE YOU START

Install the Battery

1. Insert your fingernail under the battery cover
and lift the cover up gently.
2. Insert the battery into the battery compartment,
making sure the connectors align.
3. Replace the battery cover, pressing down
gently until the cover clicks into place.

Charge the Battery

1. Plug the micro-USB cable into the device.
2. Plug the other end of the cable into the
AC adapter and plug the adapter into an
electrical outlet.
3. Charge until the battery charge indicator
shows the battery is fully charged (
4
Downloaded from www.Manualslib.com manuals search engine
Get Ready
1. Make sure you are in an area covered by
the Sprint 3G or 4G LTE network.
2. If you have a physical or wireless network
connection, disconnect it.
3. Make sure your computer's Wi-Fi (wireless
network connection) mode is turned on.
).