Installation - Honeywell HE220A,B Product Data

2 )
( 2 3
/ 8
9 - 1
1 2
( 3 0
5 )
- 9 /
1 3
( 3 4
Fig. 1. Dimensions of HE220A,B in in. (mm).
5 )
( 2 3
/ 4
9 - 1
1 3
- 9 /
1 6
( 3 4
5 )
- 3 /
1 6
( 4 2
Fig. 2. Dimensions of HE260A,B in in. (mm).
Approvals:
Underwriters Laboratories Inc. Listing: 56 BL.
Canadian Underwriters Laboratories Inc. Listing: 56 BL.
HE220A,B AND HE260A,B BYPASS FLOW-THROUGH HUMIDIFIER
1 1
- 7 /
1 6
( 2 9
0 )
1 2
- 7
( 3
1 6
1 6
5 )
6 (152)
DIAMETER
M12245
1 2
( 3 0
5 )
1 5
- 5
( 3
9 0
4
5 )
6 (152)
DIAMETER
M12251
Standard:
Air Conditioning and Refrigeration Institute Tested:
Standard 610.
Models:
HE220A TRADELINE® and HE260A TRADELINE®
Bypass Flow-through Humidifier package includes
humidifier pad, mounting template, self-piercing saddle
valve, 24 Vac transformer, H908A Convertible Humidity
Control.
HE220B TRADELINE® and HE260B TRADELINE®
Bypass Flow-through Humidifier package includes
humidifier pad, mounting template, self-piercing saddle
valve, 24 Vac transformer, H1008A Automatic Humidity
Control with HumidiCalc™ Software.
/ 1 6
)
Accessories:
Current Sensor Relay, part no. 32001754-001.
C7089H Outdoor Temperature Sensor.
H908A Convertible Humidity Control.
H1008A Automatic Humidity Control with HumidiCalc+™
Software (software calculates dewpoint to prevent
moisture condensation).
HC22A Humidifier Pad (HE220A,B only).
HE26A Humidifier Pad (HE 260A,B only).
HumidiCalc+™ Humidifier Sizing Software (software
calculates required humidifier capacity for application).
PC8900 Perfect Climate Comfort Center™ Control.
S688 Sail Switch.

INSTALLATION

WARNING
Hazardous Voltage.
Can cause personal injury or equipment damage.
Do not cut or drill into any air conditioning line or
electrical accessory.
CAUTION
Freezing Water, Flooding or
Static Pressure Hazard.
/ 1
6
Can cause water damage to home or permanent
)
equipment damage.
• The humidifier must be located where the ambient
temperature is above 32°F and below 160°F (0°C
and 71°C).
• Be sure supply plenum static pressure is no
greater than 0.3 in. w.c. and water pressure is no
greater than 125 psi.
IMPORTANT
To assure optimal product performance, be sure the
template is level before marking location.
1. Determine the best location for the humidifier and draw
a level line on the plenum. See Fig. 3.
3 68-0191—3