Table of Contents
Advertisement
1
007770
To install the blade, mount it carefully onto the spindle,
making sure that the direction of the arrow on the
surface of the blade matches the direction of the arrow
on the blade case. Install the outer flange and hex bolt,
and then use the wrench to tighten the hex bolt
(left-handed) securely counterclockwise while pressing
the shaft lock.
2
1
007808
2
1
6
004852
CAUTION:
The ring 25.4 mm or 30 mm in outer diameter is
•
factory-installed onto the spindle. Before mounting
the blade onto the spindle, always be sure that the
correct ring for the arbor hole of the blade you
intend to use is installed onto the spindle.
Install the outer flange and hex bolt, and then use the
wrench to tighten the hex bolt (left-handed) securely
counterclockwise while pressing the shaft lock.
Return the blade guard and center cover to its original
position. Then tighten the hex bolt clockwise to secure
the center cover. Lower the handle to make sure that the
blade guard moves properly. Make sure shaft lock has
released spindle before making cut.
1. Hex bolt
2. Wrench
2
1. Blade case
4
2. Arrow
3
3. Arrow
4. Saw blade
1. Spindle
3
2. Flange
4
3. Saw blade
4. Flange
5. Hex bolt
6. Ring
5
Sub-fence (for European countries only)
015064
This tool is equipped with the sub-fence. Usually position
the sub-fence inside. However, when performing left
bevel cuts, flip it outward.
CAUTION:
When performing left bevel cuts, flip the sub-fence
•
outward. Otherwise, it will contact the blade or a
part of the tool, causing possible serious injury to
the operator.
Dust bag
1
007775
007776
The use of the dust bag makes cutting operations clean
and dust collection easy. To attach the dust bag, fit it
onto the dust nozzle.
When the dust bag is about half full, remove the dust
bag from the tool and pull the fastener out. Empty the
dust bag of its contents, tapping it lightly so as to remove
particles adhering to the insides which might hamper
further collection.
NOTE:
If you connect a Makita vacuum cleaner to your saw,
more efficient and cleaner operations can be performed.
9
1. Sub-fence
1
1. Dust bag
1. Fastener
1
Advertisement
Table of Contents
