4.2.6 Other Problems
1)Fusing Problems
Error
Low Heat Error
Over Heat Error
Service Manual
Alignment & Troubleshooting
Phenomenon
In warm-up
- When the Fuser is under 50
In ready
- When the Fuser is under 130
In Printing state
- When the Fuser is under 40
When the set is over 210
for 45 seconds and more
for 10 seconds and more
of target temperature for 10 seconds and more
for 4 seconds and more
4-79
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics
Samsung Electronics