How To Load And Unload (Setting Mechanical Mode) - Samsung SCL700 Service Manual

3. Disassembly and Reassembly

3-1 How to Load and Unload (Setting Mechanical Mode)

1. Set the power-supply output to approximately 3V.
2. Choose the polarity depending on whether loading or unloading. (See Table 3-1)
3. Supply the voltage to the Motor Loading.
Drum side
+
–
Samsung Electronics
Table 3-1
Opposite side Movement of chassis
–
+
Fig. 3-1 Loading and Unloading
Loading
Unloading
3-1