2. Adjustment
2-1 Operation Without Housing Assembly
1. Remove the Housing Ass'y from the recorder
unit.
2. Connect the mechanical chassis to the recorder
circuit to supply voltage.
3. Set to Unload mode.
CONNECTED TO THE
RECORDER CIRCUIT
2-2 Setting Mechanical Mode (Without Recorder Circuit)
1. Set the power-supply output to approx. 3V.
2. Choose the polarity (depending on whether
loading or unloading).
3. Supply the voltage to the Motor Loading, and set
to the desired mode.
Samsung Electronics
4. Press the S/W Push (Keep ON status) and make
loading.
5. Push the Play key.
Note : For the removals of the Housing Ass'y,
refer to 3-2.
S/W PUSH
Fig. 2-1
Drum side
+
–
Fig. 2-2
Table 2-1
Opposite side
Movement of Chassis
–
Loading
+
Unloading
2-1