Specifications; Specific Safety Rules - Makita BVR340 Instruction Manual

ENGLISH
1 Recessed part in the battery
cartridge cover
2 Battery cartridge cover

SPECIFICATIONS

Model
Vibrations per minute
Vibration amplitude
Vibrating head (diameter x length)
Flexible shaft assembly length
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for removing bubbles from concrete
when casting concrete.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to concrete vibrator safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious per-
sonal injury.
1. Always keep your hands and face away from
vibrating head when operating.
2. Switch off the tool immediately if you notice
abnormal noise or something faulty during oper-
ation.
3. Inspect the tool carefully for breakage, cracks or
deformation if you accidentally drop it or strike it
against something.
4. Do not carry the tool with finger on switch.
5. Do not set the tool down and switch it on. The
vibrating head may whip around out of control
and cause an accident.
6. Be careful not to allow water, wet concrete or the
like to get into the tool. Do not let the tool fall
into wet concrete.
7. Insert the vibrating head carefully between iron/
steel frames or reinforcing rods not to come in
contact with them.
8. Do not crush or twist the fexible hose.
9. Do not overly bend the flexible hose.
10. Use a wet cloth or the like to carefully wipe off
any wet concrete left on the tool after use. Extra
care should be given to thorough cleaning of the
vents, switch area, cover openings, etc.
4
Explanation of general view
3 Red button
4 Button
5 Battery cartridge
BVR340 BVR440
12,500 12,500
800 mm 1,200 mm
1,083 mm 1,483 mm
3.1 kg 3.6 kg
D.C. 14.4 V
11. Do not use the tool in the rain. Do not clean the
SAVE THESE INSTRUCTIONS.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
IMPORTANT SAFETY INSTRUCTIONS FOR
BATTERY CARTRIDGE
1.
GEB023-2
2.
3.
4.
5.
6.
7.
8.
SAVE THESE INSTRUCTIONS.
6 Cover
7 Switch lever
8 Slope
BVR350 BVR450
13,000
1.0 mm
25 mm x 221 mm
800 mm 1,200 mm
1,083 mm 1,483 mm
3.2 kg
D.C. 18 V
tool in water.
Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
Do not disassemble battery cartridge.
If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow,
overheating, possible burns and even a break-
down.
Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50°C (122°F).
Do not incinerate the battery cartridge even if it
is severely damaged or is completely worn out.
The battery cartridge can explode in a fire.
Be careful not to drop or strike battery.
BVR850
13,000 12,500
2,400 mm
2,683 mm
3.7 kg 5.3 kg
ENC007-2