PLAYBACK OF YOUR iPod/USB DEVICES
Connecting your iPod or USB devices
5V
y
• Connect your iPod using the USB cable supplied with your iPod.
• Remove a USB device after you stop playback.
• Do not use a USB hub. This unit does not recognize a USB device if the USB device is connected via a USB hub.
Playing back your iPod
1
Press SOURCE repeatedly to switch the
audio source to "USB".
Main unit/Remote control
SOURCE
PURE DIRECT
5V
2.1A
SOURCE
Front panel display
S o u rc e
20
En
SOURCE
PURE DIRECT
2.1A
OPEN/CLOSE
SOURCE
PURE DIRECT
SOURCE
1
2
4
5
U S B
2
Connect your iPod to the USB port on
the main unit.
3
Start playback on your iPod.
Operate your iPod to start playback, select a track,
pause, and stop playback (standard playback mode).
y
• You can also operate to play, pause, stop, skip forward/
backward, and search forward/backward from the playback
buttons on the main unit and remote control during standard
playback mode.
DISPLAY
Main unit:
3
/
,
,
Remote control:
6
,
,
,
• You cannot operate shuffle and repeat modes from your iPod
and the remote control during standard playback mode.
Note
iPod may not function properly with this unit if software on iPod
is not updated. Be sure to use the latest version of iPod software.
For details on supported iPod, see "Supported iPod via USB port"
(☞ P.31).
SELECT
PUSH
ENTER
RETURN
/
,
/
,
,
,