The Structure Of The Settings Menu - JVC DLA-RS15 Instruction Manual

Settings
4

The structure of the Settings menu

The menu for this device is structured as follows:
Picture Adjust
Picture Mode
01
Contrast
02
Brightness
03
Color
04
Tint
05
Color Temp.
06
Gamma
07
08 Advanced
Lens Aperture
09
Reset
10
Input Signal
HDMI
11
COMP.
12
Video/S-Video
13
Aspect (Video)
14
Aspect (Computer)
15
V-Stretch
16
17 Picture Position
Over Scan
18
Mask
19
Film Mode
20
28
Adjusts the pattern of the projected image.
Setting: Cinema 1, Cinema 2, Cinema 3, Natural, Stage, Dynamic, User 1, User 2
Adjusts the contrast of the projected image.
Setting: –50 to 50
Adjusts the brightness of the projected image.
Setting: –50 to 50
Adjusts the color density of the projected image.
Setting: –50 to 50
Adjusts the hue of the projected image.
Setting: –50 to 50
Sets the color temperature of the projected image.
Setting: 5800K, 6500K, 7500K, 9300K, High Bright, Custom 1, Custom 2, Custom 3
Sets the gradation characteristics of the projected image.
Setting: Normal, A, B, C, D, Custom 1, Custom 2, Custom 3
Adjusts the contours of the image and detailed composition of the image.
Setting: Sharpness, NR, CTI, Clear Motion Drive
Sets the lens aperture.
Setting: 1, 2, 3
Reset the setting.
Conigures HDMI input signal.
Setting: Input, Color Space, Control with HDMI
Conigures the input signal for the component video input terminals.
Setting: Y Pb/Cb Pr/Cr, RGB, SCART
Conigures the Video/S-Video input signals.
Setting: NTSC, Setup Level, Color System
Conigures the screen size of the projected image.
Setting: 4:3, 16:9, Zoom
Conigures the screen size of the projected image.
Setting: Auto, 1:1, Full
When set to "On", the projected 2.35:1 image will be stretched vertically to the panel resolution.
Setting: On, Off
Adjusts the horizontal/vertical position of the projected image.
Selects whether or not to set over scan for the SD video signal.
Setting: On, Off
Masks (Hides) the outer area of the projected image.
Setting: 2.5, 5, Off
Selects this to view movies shot on ilm.
Setting: Auto, ilm, Off