JVC DLA-RS15 Instruction Manual page 159

Settings
4
Setting Menu (Continued)
Input Signal > COMP.
COMP.
12
Conigures the input signal for the component video input terminals.
Color Space
●
The setting is available only if the component video terminals are selected.
Input Signal > Video/S-Video
Video/S-Video
13
Conigures the Video/S-Video input signals.
NTSC Setup Level
●
Adjust this only when NTSC signals are input via Video or S-Video terminal.
Color System
●
The setting is available
Input Signal > PC
PC
14
Conigures PC input.
Auto Alignment
Tracking
Phase
Picture Position
●
This can be set only when selecting PC input terminal.
Input Signal > Picture Position
15 Picture Position
Adjusts the horizontal/vertical position of the projected image.
●
The position of the image varies depending on the input signals. The image of some signals may not be fully displayed. Adjust the position
of image using this menu to display the image properly.
36
Y Pb/Cb Pr/Cr
RGB
SCART
0IRE
7.5IRE
Auto
NTSC
NTSC4.43
PAL
PAL-M
PAL-N
SECAM
only when the Video or S-Video input image is projected.
Automatically adjusts "Tracking", "Phase" and "Picture Position".
Adjust the horizontal size and display area of the image.
(This may vary depending on the signal, but does not usually require adjustment.)
Adjust lickering and blurred images.
(This may vary depending on the signal, but does not usually require adjustment.)
Adjust the display position of the image.
Select this when the component video signals are input.
Select this when the RGB video signals are input.
Select this when RGB video signals and sync signals are
input via the SCART interface for European markets.
Adjusts the gradation for signals without the 7.5 IRE setup.
Adjusts the gradation for signals with the 7.5 IRE setup.
Conigures the color system automatically.
Select this when the color system is NTSC.
Select this when the color system is NTSC4.43.
Select this when the color system is PAL.
Select this when the color system is PAL-M.
Select this when the color system is PAL-N.
Select this when the color system is SECAM.