Advertisement
Honeywell FutureSmart Products
CAUTION: To prevent electric shock, do not use this plug with an extension cord, receptacle or other outlet unless the blades can be
fully inserted to prevent blade exposure.
NOTE TO INSTALLER: This reminder calls the system installer's attention to Article 820-22 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Pg 4
Installing an eight receiver DirectTV
SATV Distribution System in a QNIC
View from back side of Modules
The MDC8202 is used to feed between five
and eight receivers. If one to four DirectTV
receivers are used then you can use an MDP-3
and/or the pass through connections on an
MDC4XX module.to feed up to four. For
DishNetworks you will need to use
DishNetworks Proprietary Hardware to expand
beyond four.
165 Eileen Way, Syosset, NY 11791
Copyright © 2004 Honeywell International Inc.
www.honeywell.com/security
Front view with modules installed
Plug transformer into
MDDS8202 and then into 110V
Triple LNB
SATV dish
IMPORTANT!!
Satellite Installation Guide
outlet
Honeywell FutureSmart Products
Advertisement
