Yamaha AW2816 Service Manual page 81

No Song to Backup!
No Song to Edit!
No Song to Load!
No Song to Restore!
No Song to Save!
No Song to Write!
No Song!
No Stereo Track!
No Track to Open Wave Display!
Not WAV Drive!
Not WAV File!
Partition Not Found!
Recall Channel Data Conflict!
SCSI Error!
Selected Drive is not CD Drive!
Selected Drive is not Connected!
Selected Preset is Effect2 Only!
Selected Song Status Conflict!
Selected Track is not Recorded!
Too Many Regions!
Too Small Region!
Messages at power-on
Unformatted HDD
Recognized AW4416-Formatted HDD A hard disk formatted for the AW4416 is installed.
Can not find HDD
Illegal HDD!
Format OK? [Y (Enter) /N (Any)]
There is no song to backup.
There is no song has been selected for editing.
There is no song to load.
There is no song to restore.
There is no song to save.
No songs to write to the CD have been selected.
No songs can be found.
There is no stereo track.
There is no track data for waveform display.
The selected drive contains no WAV files.
The file is not a WAV file.
The specified partition was not found.
The specified channel library cannot be loaded into this channel.
An error has occurred in the SCSI connection.
The selected drive is not a CD drive.
The selected drive is not connected.
The selected preset can be used only by effect 2.
The track cannot be imported, since it is from a song with a different
sampling frequency or quantization (bit length).
The selected track is not recorded.
There are too many regions.
Time compression/expansion cannot be executed since the region is
too small.
The internal hard disk has not been formatted for the AW2816. This
message will be displayed if a new hard disk is installed.
No internal hard disk is installed, and the AW2816 cannot start up
correctly.
A problem was found with the internal hard disk, and the AW2816
cannot start up correctly.
If you want to format the internal hard disk for the AW2816, press the
[ENTER] key. If you want to exchange the internal hard disk without
formatting it for the AW2816, make sure that the access indicator is
dark, and turn off the power.
AW2816
81