Loading Documents; Paper Requirements; Printable Area - Canon FAX-B840 User Manual

Loading documents

1 Adjust the document guide to the width of the
document, and gently insert the top of the
document face up into the document tray until it
stops. You will hear a beep.
If you have trouble feeding multipage documents from the document
tray into the fax, remove the stack and tap it on a flat surface to even
the edges.
• For a multipage document, the pages are fed one by one from the top of the stack.
• Wait until all pages of your document have been scanned before starting a new job.
• If you want to send a document with more than 15 (5 legal-size) pages, divide the document into 2 sections and send
each section in a separate transmission.

Paper requirements

Your fax supports A4-, letter-, and legal-size paper in portrait orientation. You can use regular copier paper, cotton
bond paper, or typical letterhead. Your fax does not require special ink jet paper. Always use paper without curls,
folds, staples, or damaged edges. Look at the label on the package to see if the paper has a preferred side for printing.
• Be sure to test paper before purchasing large quantities.
• For details on loading paper in the multi-purpose tray, see p. 10.

Printable area

The shaded area below shows the printable area of A4-size paper. Be sure to print within this area.
24
210 mm
297 mm A4
3.4±1.5 mm
3±1.5 mm
FEED
DIRECTION
7 mm
3.4 mm~
A4 LTR