Adding Carriage Return Suffix; Standard Product Defaults; Additional Programming - Honeywell AP-100BT Quick Start Manual

Adding Carriage Return Suffix

If you want a carriage return (CR) to display after the bar code data
on your output scan the Add CR Suffix bar code below. Scan the
Clear All Suffixes bar code to remove suffixes.
Clear All Suffixes

Standard Product Defaults

This bar code resets all standard product default settings.
Note: Resetting standard defaults disconnects the scanner from the
Access Point. Scan the Linking bar code to re-establish a
connection. Refer to your User's Guide at
www.honeywellaidc.com
product defaults.

Additional Programming

The Access Point has all the programming capability of a Cordless
Charge Base. Refer to Cordless System Operation information in
your User's Guide at
information.
Standard Product Default Settings
www.honeywellaidc.com
for additional information about
Add CR Suffix
for programming