Using Your Remote Access Code; Changing The Fax Forwarding Number; Retrieving Fax Messages - Brother FAX-2890 Advanced User's Manual

You can change your code at any time. If you
want to make your code inactive, press Clear
and OK in b to restore the default setting – –
–l.

Using your Remote Access Code

a
Dial your fax number from a telephone
or another fax machine using touch
tone.
b
When your machine answers, during a
period of silence enter your Remote
Access Code.
c
The machine signals if it has received
messages:
 No beeps
No messages received.
 1 long beep
Fax messages received.
d
The machine gives two short beeps to
tell you to enter a command. The
machine will hang up if you wait longer
than 30 seconds before entering a
command. If you enter an invalid
command the machine will beep three
times.
e
Press 9 0 to reset the machine when you
have finished.
f
Hang up.

Retrieving fax messages

a
Dial your fax number from a telephone
or another fax machine using touch
tone.
b
When your machine answers, during a
period of silence enter your Remote
Access Code (3 digits followed by l). If
you hear one long beep, you have
messages.
c
When you hear two short beeps, use the
dial pad to press 9 6 2.
d
Wait for a long beep, and then use the
dial pad to enter the number of the
remote fax machine where you want
your fax messages sent, followed by ##
(up to 20 digits).
e
Hang up after you hear your machine
4
beep. Your machine will call the other
machine, which will then print your fax
messages.
Note
You can insert a pause in a fax number by
using the # key.

Changing the Fax Forwarding number

You can change the default setting of your fax
forwarding number from another telephone or
fax machine using touch tone.
a
Dial your fax number from a telephone
or another fax machine using touch
tone.
b
When your machine answers, enter
your Remote Access Code (3 digits
followed by l) during a period of silence.
If you hear one long beep, you have
messages.
c
When you hear two short beeps, use the
dial pad to press 9 5 4.
d
Wait for a long beep, and then use the
dial pad to enter the new number of the
remote fax machine where you want
your fax messages forwarded followed
4
by ## (up to 20 digits).
e
Press 9 0 to reset the machine when you
have finished.
f
Hang up after you hear your machine
beep.
Note
You can insert a pause in a fax number by
using the # key.
Receiving a fax
4
4
19