Table of Contents
Advertisement
Cleaning and care
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary. Remove
the PerfectFresh zone compartments.
^ The compartments in the
PerfectFresh zone are on telescopic
rails. These rails should only be
cleaned with a damp cloth.
When cleaning the appliance, be
careful not to wash the special
lubricant out of the telescopic rails.
^ After cleaning, wipe the outer casing,
interior and accessories with a damp
cloth and dry with a soft cloth.
Leave the door open to air the
appliance for a short while.
^ Remove any soiling on stainless steel
surfaces with the Original Miele Care
product for stainless steel.
^ Apply the Original Miele Care
product for stainless steel to stainless
steel panels and frames each time
you clean the appliance.
This will help to protect stainless steel
surfaces and prevent resoiling for a
period of time.
42
Ventilation gaps
^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.
Door seals
Do not use any oils or grease on the
door seals as these will cause the
seals to deteriorate and become
porous over time.
The door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
After cleaning
^ Replace all shelves and accessories
in the refrigerator section.
^ Reconnect the appliance to the
electricity supply and switch it on.
^ Switch on the SuperFreeze function
so that the freezer can cool down
quickly. The indicator light will come
on.
^ Once the freezer has reached the
required temperature, place the food
back in the freezer baskets and put
them back in the freezer.
^ Switch off SuperFreeze by touching
the SuperFreeze sensor when the
temperature in the freezer is a
constant -18 °C or colder.
The indicator light will go out.
Hide quick links:
Advertisement
Table of Contents
