Adjusting The Condiment Tray/Bottle Shelf - Miele KFN 9758 iD-3 Operating And Installation Instructions

Adjusting the interior fittings
PerfectFresh zone
compartments
The compartments in the PerfectFresh
zone are on telescopic rails, and can
be removed for filling, emptying or
cleaning purposes:
Remove the bottle shelf from the
door first to make it easier to take
out the compartments and the
dividing plate.
^ Pull the compartments out as far as
they will go.
^ Grab hold of the sides of the
compartment towards the rear, lift up
and pull out to remove it.
Push the runners back in again to
avoid injury or damage.
^ Carefully pull out the lid between the
compartments slightly, and pull it
down and out.
^ To replace it, insert the compartment
lid from beneath into the holders, and
push it back into place.
When cleaning the appliance, be
careful not to wash the special
lubricant out of the telescopic rails.
Clean these with a damp cloth only.
32
To replace the compartment,
^ place it back on the fully extended
runners.
^ Push the compartment back into the
appliance until it clicks into position.
Adjusting the condiment
tray/bottle shelf
^ Lift the tray/shelf up and out of the
stainless steel frame to remove.
^ Push up the stainless steel frame,
and remove.
^ Replace the frame at the required
height. Ensure that it is securely
pushed back into position.
^ Replace the tray/shelf in the frame.
The tray/shelf can be completely
removed for loading and unloading and
put back in.
In this way, the tray/shelf can be used
as a serving tray on the table.