Code
08-000
08-001
Symptom and Possible Cause
The lead edge of the document failed to actuate the Registration sensor within the predetermined time after
initialization of Paper Pick up.
Possible Cause
1. Pick up roller is defective.
2. Scan sensor or actuator is defective.
3. Document paper path is contaminated.
Troubleshooting method
1. Check the paper path for a small piece of paper that may have been torn from an original; or foreign materials
such as paper clips, extracted staples, etc.
2. Check the condition of the Pick-up, Paper Feed Roller and DADF Rubber, it may have reached its PM interval.
3. Registration Sensor change
4. Registration Sensor drive Board change
5. Pick-up Solenoid change
Service Manual
Alignment & Troubleshooting
Error message
Original paper Jam
Original paper jam inside of scanner. Remove Jam
4-46
Samsung Electronics